Transpose, Dose

SCREW OR VIBRATORY FEEDERS

SCREW OR VIBRATORY FEEDERS

Equipped with charging hopper, with or without inner agitator, and appropriately chosen on the ground of the product features among: Single screw: for powders or granules having easy and medium smoothness; Coupled double screw: for greasy, hygroscopic powders; Vibrating canal: for pellets granules with low viscosity.
These systems are indicated for volumetric micro dosing quite precise, easy and affordable, for little and medium quantities.

The same equipment on electronic weighing systems transform themselves in leaking weight dosing machines of high precision and repeatability suitable for discontinuous dosages (batch).
Then, with the addition of specific hardware and software you can obtain, with the same equipment, leaking weight continuous precise dosing machines suitable for the direct feeding of continuous process machines also with more dosing machines at the same time.

In advanced applications, you can adapt, in real time, the capacities of the continuous dosing machines, considering the real consume in that moment of the machine.

ROTARY FEEDER DOSER

ROTARY FEEDER DOSER

It is used for difficult flowing products: In effect, thanks to the presence of an agitator, the product is always in motion; so you don’t have to restrict the tank walls up to the dimensions of the discharge.
The discharge of the product is regulated by means of a shutter which consents a precise and modular dosing.

Constructions foreseen:

  • Carbon steel
  • Stainless steel AISI 304 or AISI 316

SHOVEL CONVEYOR

SHOVEL CONVEYOR

The shovel conveyor conveys the product basing on the principle of continuous loop liner translation within two troughs with axes on the same level; shovels are towed by a special rollers chain.

It is used in the following cases:

  • Transport of delicate products, limiting breakages or crushing
  • Necessity to not have stagnation of product inside the conveyor, because the particular design makes it self-cleaning
  • Continuous automatic feeding in different points, several operations with or without contemporary, since you can recycle the whole quantity of product contained

The main characteristics are:

  • Robust and reliable design with very accurate powder sealing;
  • Possibility to be installed inclined up to an angle of max 70° on the horizontal

Foreseen constructions:

  • Carbon steel with heads in cast aluminum;
  • Stainless steel AISI 304 or AISI 316.

SCREW CONVEYOR

SCREW CONVEYOR

The mechanical screw conveyor is widely used to convey and/or meter pulverized or granulated solids, also on long distances. Is made into various types: tube or canal (easily checked), easy or double screw (for particular difficult products).
To improve the feeding, on the loading mouth of the conveyor you can assembly a particular mixer which consents a better distribution of the product.

Particular characteristics:

  • It’s usually made of carbon steel or stainless steel, with tempered and chromed shafts, supported by bearings protected with particular mechanic sealing
  • The control board is made of a gear motor and chain transmission, or with mechanic speed variator with variation of the motor’s turns electronically servo controlled
  • Construction foreseen also for ATEX zones

PROPULSION FOR PNEUMATIC CONVEYANCE

PROPULSION FOR PNEUMATIC CONVEYANCE

The propulsion is the main element of the high pressure pneumatic conveyance line with medium and high density product flow. This type of conveyance offers several advantages essentially because of the low speed, low consume of fluid and absence of moving mechanic parts.
To consider the low wear of piping with very abrasive products, the possibility to transport delicate products without breakages and the limited filtering surface necessary on the arrival points.

The main characteristics of the propulsion are:

  • Engineering and construction in accordance with the present European directives
  • Complete supply of all the managing, safety and regulation systems

Constructions foreseen:

  • Carbon steel
  • Stainless steel AISI 304 and AISI 316

BUCKETS ELEVATOR

BUCKETS ELEVATOR

The Bucket Elevator is most suited to convey vertically pulverized or granulated solids, also with high capacities, without damaging the products and spreading powder in the ambient.

The main characteristics are:

  • Perfectly closed construction, self-supporting and flanged elements, very accurate in particular for the powder sealing;
  • Possibility of inner pressurization with inert gas;
  • Rotary shafts to hold the pulleys assembled on supports with powder sealing protected by grease or with compressed air or other gas insufflation.

Constructions foreseen:

  • Carbon steel
  • Stainless steel AISI 304 or AISI 316 for parts in contact with the product

ROTARY FEEDER

ROTARY FEEDER

It is used for difficult flowing products: In effect, thanks to the presence of an agitator, the product is always in motion; so you don’t have to restrict the tank walls up to the dimensions of the discharge.
The particularly robust construction consents a high reliability also for difficult usages.

Constructions foreseen:

  • Carbon steel
  • Stainless steel AISI 304 or AISI 316 for parts in contact with the product
  • Also for ATEX zones